This is pdfTeX, Version 3.1415926-1.40.11 (MiKTeX 2.9) (preloaded format=pdflatex 2013.4.19)  13 AUG 2013 14:44
entering extended mode
**C:/Users/Piotr*Wojciechowski/Documents/My*Dropbox/piotr/Presentation/invopt.t
ex

("C:/Users/Piotr Wojciechowski/Documents/My Dropbox/piotr/Presentation/invopt.t
ex"
LaTeX2e <2009/09/24>
Babel <v3.8l> and hyphenation patterns for english, afrikaans, ancientgreek, ar
abic, armenian, assamese, basque, bengali, bokmal, bulgarian, catalan, coptic, 
croatian, czech, danish, dutch, esperanto, estonian, farsi, finnish, french, ga
lician, german, german-x-2009-06-19, greek, gujarati, hindi, hungarian, iceland
ic, indonesian, interlingua, irish, italian, kannada, kurmanji, lao, latin, lat
vian, lithuanian, malayalam, marathi, mongolian, mongolianlmc, monogreek, ngerm
an, ngerman-x-2009-06-19, nynorsk, oriya, panjabi, pinyin, polish, portuguese, 
romanian, russian, sanskrit, serbian, slovak, slovenian, spanish, swedish, swis
sgerman, tamil, telugu, turkish, turkmen, ukenglish, ukrainian, uppersorbian, u
senglishmax, welsh, loaded.

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamer.cls"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasercs.sty")
Runaway argument?
Header$ \ProvidesPackage {\beamer@rcsfile }[\beamer@rcsdate \space (r\ETC.
! File ended while scanning use of \beamer@parseid.
<inserted text> 
                \par 
l.12 \ProvidesClassRCS
                       $Header$
I suspect you have forgotten a `}', causing me
to read past where you wanted me to stop.
I'll try to recover; but if the error is serious,
you'd better type `E' or `X' now and fix your file.

Runaway argument?
Header$ \ProvidesClass {\beamer@rcsfile }[\beamer@rcsdate \space deve\ETC.
! Paragraph ended before \beamer@parseid was complete.
<to be read again> 
                   \par 
l.14 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasemodes.sty"
Runaway argument?
Header$ \ProvidesPackage {\beamer@rcsfile }[\beamer@rcsdate \space (r\ETC.
! Paragraph ended before \beamer@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@tempbox=\box26
\beamer@tempcount=\count79
\c@beamerpauses=\count80

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasedecode.sty"
Runaway argument?
Header$ \ProvidesPackage {\beamer@rcsfile }[\beamer@rcsdate \space (r\ETC.
! Paragraph ended before \beamer@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@slideinframe=\count81
\beamer@minimum=\count82
)
\beamer@commentbox=\box27
\beamer@modecount=\count83
)
\headheight=\dimen102
\headdp=\dimen103
\footheight=\dimen104
\sidebarheight=\dimen105
\beamer@tempdim=\dimen106
\beamer@finalheight=\dimen107
\beamer@animht=\dimen108
\beamer@animdp=\dimen109
\beamer@animwd=\dimen110
\beamer@leftmargin=\dimen111
\beamer@rightmargin=\dimen112
\beamer@leftsidebar=\dimen113
\beamer@rightsidebar=\dimen114
\beamer@boxsize=\dimen115
\beamer@vboxoffset=\dimen116
\beamer@descdefault=\dimen117
\beamer@descriptionwidth=\dimen118
\beamer@lastskip=\skip41
\beamer@areabox=\box28
\beamer@animcurrent=\box29
\beamer@animshowbox=\box30
\beamer@sectionbox=\box31
\beamer@logobox=\box32
\beamer@linebox=\box33
\beamer@sectioncount=\count84
\beamer@subsubsectionmax=\count85
\beamer@subsectionmax=\count86
\beamer@sectionmax=\count87
\beamer@totalheads=\count88
\beamer@headcounter=\count89
\beamer@partstartpage=\count90
\beamer@sectionstartpage=\count91
\beamer@subsectionstartpage=\count92
\beamer@animationtempa=\count93
\beamer@animationtempb=\count94
\beamer@xpos=\count95
\beamer@ypos=\count96
\beamer@showpartnumber=\count97
\beamer@currentsubsection=\count98
\beamer@coveringdepth=\count99
\beamer@sectionadjust=\count100
\beamer@tocsectionnumber=\count101

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseoptions.sty"
Runaway argument?
Header$ \ProvidesPackage {\beamer@rcsfile }[\beamer@rcsdate \space (r\ETC.
! Paragraph ended before \beamer@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\graphics\keyval.sty"
Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
\KV@toks@=\toks14
))
\beamer@paperwidth=\skip42
\beamer@paperheight=\skip43

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\geometry\geometry.sty"
Package: geometry 2010/09/12 v5.6 Page Geometry

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ifpdf.sty"
Package: ifpdf 2010/01/28 v2.1 Provides the ifpdf switch (HO)
Package ifpdf Info: pdfTeX in pdf mode detected.
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ifvtex.sty"
Package: ifvtex 2010/03/01 v1.5 Switches for detecting VTeX and its modes (HO)
Package ifvtex Info: VTeX not detected.
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\ifxetex\ifxetex.sty"
Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional
)
\Gm@cnth=\count102
\Gm@cntv=\count103
\c@Gm@tempcnt=\count104
\Gm@bindingoffset=\dimen119
\Gm@wd@mp=\dimen120
\Gm@odd@mp=\dimen121
\Gm@even@mp=\dimen122
\Gm@layoutwidth=\dimen123
\Gm@layoutheight=\dimen124
\Gm@layouthoffset=\dimen125
\Gm@layoutvoffset=\dimen126
\Gm@dimlist=\toks15

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\geometry\geometry.cfg"))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\extsizes\si
ze8.clo"
File: size8.clo 1999/11/11 v1.4a NON-Standard LaTeX file (size option)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\basicla
yer\pgfcore.sty"
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\graphics\graphicx.sty"
Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\graphics\graphics.sty"
Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR)

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\graphics\trig.sty"
Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\00miktex\graphics.cfg"
File: graphics.cfg 2007/01/18 v1.5 graphics configuration of teTeX/TeXLive
)
Package graphics Info: Driver file: pdftex.def on input line 91.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\pdftex-def\pdftex.def"
File: pdftex.def 2010/09/14 v0.05b Graphics/color for pdfTeX
\Gread@gobject=\count105
))
\Gin@req@height=\dimen127
\Gin@req@width=\dimen128
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\systeml
ayer\pgfsys.sty"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\utiliti
es\pgfrcs.sty"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\utili
ties\pgfutil-common.tex"
\pgfutil@everybye=\toks16
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\utili
ties\pgfutil-latex.def"
\pgfutil@abb=\box34

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\ms\everyshi
.sty"
Package: everyshi 2001/05/15 v3.00 EveryShipout Package (MS)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\utili
ties\pgfrcs.code.tex"
Package: pgfrcs 2010/10/25 v2.10 (rcs-revision 1.24)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\syste
mlayer\pgfsys.code.tex"
Package: pgfsys 2010/06/30 v2.10 (rcs-revision 1.37)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\utili
ties\pgfkeys.code.tex"
\pgfkeys@pathtoks=\toks17
\pgfkeys@temptoks=\toks18

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\utili
ties\pgfkeysfiltered.code.tex"
\pgfkeys@tmptoks=\toks19
))
\pgf@x=\dimen129
\pgf@y=\dimen130
\pgf@xa=\dimen131
\pgf@ya=\dimen132
\pgf@xb=\dimen133
\pgf@yb=\dimen134
\pgf@xc=\dimen135
\pgf@yc=\dimen136
\w@pgf@writea=\write3
\r@pgf@reada=\read1
\c@pgf@counta=\count106
\c@pgf@countb=\count107
\c@pgf@countc=\count108
\c@pgf@countd=\count109

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\syste
mlayer\pgf.cfg"
File: pgf.cfg 2008/05/14  (rcs-revision 1.7)
)
Package pgfsys Info: Driver file for pgf: pgfsys-pdftex.def on input line 900.

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\syste
mlayer\pgfsys-pdftex.def"
File: pgfsys-pdftex.def 2009/05/22  (rcs-revision 1.26)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\syste
mlayer\pgfsys-common-pdf.def"
File: pgfsys-common-pdf.def 2008/05/19  (rcs-revision 1.10)
)))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\syste
mlayer\pgfsyssoftpath.code.tex"
File: pgfsyssoftpath.code.tex 2008/07/18  (rcs-revision 1.7)
\pgfsyssoftpath@smallbuffer@items=\count110
\pgfsyssoftpath@bigbuffer@items=\count111
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\syste
mlayer\pgfsysprotocol.code.tex"
File: pgfsysprotocol.code.tex 2006/10/16  (rcs-revision 1.4)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\xcolor\xcol
or.sty"
Package: xcolor 2007/01/21 v2.11 LaTeX color extensions (UK)
 ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\00miktex\color.cfg"
File: color.cfg 2007/01/18 v1.5 color configuration of teTeX/TeXLive
)
Package xcolor Info: Driver file: pdftex.def on input line 225.
Package xcolor Info: Model `cmy' substituted by `cmy0' on input line 1337.
Package xcolor Info: Model `hsb' substituted by `rgb' on input line 1341.
Package xcolor Info: Model `RGB' extended on input line 1353.
Package xcolor Info: Model `HTML' substituted by `rgb' on input line 1355.
Package xcolor Info: Model `Hsb' substituted by `hsb' on input line 1356.
Package xcolor Info: Model `tHsb' substituted by `hsb' on input line 1357.
Package xcolor Info: Model `HSB' substituted by `hsb' on input line 1358.
Package xcolor Info: Model `Gray' substituted by `gray' on input line 1359.
Package xcolor Info: Model `wave' substituted by `hsb' on input line 1360.
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcore.code.tex"
Package: pgfcore 2010/04/11 v2.10 (rcs-revision 1.7)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmath.code.tex"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathcalc.code.tex"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathutil.code.tex")
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathparser.code.tex"
\pgfmath@dimen=\dimen137
\pgfmath@count=\count112
\pgfmath@box=\box35
\pgfmath@toks=\toks20
\pgfmath@stack@operand=\toks21
\pgfmath@stack@operation=\toks22
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.code.tex"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.basic.code.tex")
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.trigonometric.code.tex")
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.random.code.tex")
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.comparison.code.tex")
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.base.code.tex")
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.round.code.tex")
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfunctions.misc.code.tex")))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\math\
pgfmathfloat.code.tex"
\c@pgfmathroundto@lastzeros=\count113
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorepoints.code.tex"
File: pgfcorepoints.code.tex 2010/04/09  (rcs-revision 1.20)
\pgf@picminx=\dimen138
\pgf@picmaxx=\dimen139
\pgf@picminy=\dimen140
\pgf@picmaxy=\dimen141
\pgf@pathminx=\dimen142
\pgf@pathmaxx=\dimen143
\pgf@pathminy=\dimen144
\pgf@pathmaxy=\dimen145
\pgf@xx=\dimen146
\pgf@xy=\dimen147
\pgf@yx=\dimen148
\pgf@yy=\dimen149
\pgf@zx=\dimen150
\pgf@zy=\dimen151
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorepathconstruct.code.tex"
File: pgfcorepathconstruct.code.tex 2010/08/03  (rcs-revision 1.24)
\pgf@path@lastx=\dimen152
\pgf@path@lasty=\dimen153
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorepathusage.code.tex"
File: pgfcorepathusage.code.tex 2008/04/22  (rcs-revision 1.12)
\pgf@shorten@end@additional=\dimen154
\pgf@shorten@start@additional=\dimen155
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorescopes.code.tex"
File: pgfcorescopes.code.tex 2010/09/08  (rcs-revision 1.34)
\pgfpic=\box36
\pgf@hbox=\box37
\pgf@layerbox@main=\box38
\pgf@picture@serial@count=\count114
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcoregraphicstate.code.tex"
File: pgfcoregraphicstate.code.tex 2008/04/22  (rcs-revision 1.9)
\pgflinewidth=\dimen156
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcoretransformations.code.tex"
File: pgfcoretransformations.code.tex 2009/06/10  (rcs-revision 1.11)
\pgf@pt@x=\dimen157
\pgf@pt@y=\dimen158
\pgf@pt@temp=\dimen159
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorequick.code.tex"
File: pgfcorequick.code.tex 2008/10/09  (rcs-revision 1.3)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcoreobjects.code.tex"
File: pgfcoreobjects.code.tex 2006/10/11  (rcs-revision 1.2)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorepathprocessing.code.tex"
File: pgfcorepathprocessing.code.tex 2008/10/09  (rcs-revision 1.8)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorearrows.code.tex"
File: pgfcorearrows.code.tex 2008/04/23  (rcs-revision 1.11)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcoreshade.code.tex"
File: pgfcoreshade.code.tex 2008/11/23  (rcs-revision 1.13)
\pgf@max=\dimen160
\pgf@sys@shading@range@num=\count115
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcoreimage.code.tex"
File: pgfcoreimage.code.tex 2010/03/25  (rcs-revision 1.16)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcoreexternal.code.tex"
File: pgfcoreexternal.code.tex 2010/09/01  (rcs-revision 1.17)
\pgfexternal@startupbox=\box39
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorelayers.code.tex"
File: pgfcorelayers.code.tex 2010/08/27  (rcs-revision 1.2)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcoretransparency.code.tex"
File: pgfcoretransparency.code.tex 2008/01/17  (rcs-revision 1.2)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\basic
layer\pgfcorepatterns.code.tex"
File: pgfcorepatterns.code.tex 2009/07/02  (rcs-revision 1.3)
)))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\utiliti
es\xxcolor.sty"
Package: xxcolor 2003/10/24 ver 0.1
\XC@nummixins=\count116
\XC@countmixins=\count117
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\hyperref\hyperref.sty"
Package: hyperref 2010/09/17 v6.81q Hypertext links for LaTeX

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ltxcmds.sty"
Package: ltxcmds 2010/04/26 v1.7 LaTeX kernel commands for general use (HO)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\infwarerr.sty"
Package: infwarerr 2010/04/08 v1.3 Providing info/warning/message (HO)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\kvsetkeys.sty"
Package: kvsetkeys 2010/03/01 v1.9 Key value parser (HO)

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\etexcmds.sty"
Package: etexcmds 2010/01/28 v1.3 Prefix for e-TeX command names (HO)
Package etexcmds Info: Could not find \expanded.
(etexcmds)             That can mean that you are not using pdfTeX 1.50 or
(etexcmds)             that some package has redefined \expanded.
(etexcmds)             In the latter case, load this package earlier.
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\pdfescape.sty"
Package: pdfescape 2010/03/01 v1.9 Provides hex, PDF name and string conversion
s (HO)

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\pdftexcmds.sty"
Package: pdftexcmds 2010/04/01 v0.9 Utility functions of pdfTeX for LuaTeX (HO)


("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\ifluatex.sty"
Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
Package ifluatex Info: LuaTeX not detected.
)
Package pdftexcmds Info: LuaTeX not detected.
Package pdftexcmds Info: \pdf@primitive is available.
Package pdftexcmds Info: \pdf@ifprimitive is available.
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\oberdiek\hycolor.sty"
Package: hycolor 2009/12/12 v1.6 Color options of hyperref/bookmark (HO)

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\oberdiek\xcolor-patch.sty"
Package: xcolor-patch 2009/12/12 xcolor patch
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\oberdiek\letltxmacro.sty"
Package: letltxmacro 2008/06/24 v1.3 Let assignment for LaTeX macros (HO)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\oberdiek\kvoptions.sty"
Package: kvoptions 2010/02/22 v3.7 Keyval support for LaTeX options (HO)
)
\@linkdim=\dimen161
\Hy@linkcounter=\count118
\Hy@pagecounter=\count119

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\hyperref\pd1enc.def"
File: pd1enc.def 2010/09/17 v6.81q Hyperref: PDFDocEncoding definition (HO)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\intcalc.sty"
Package: intcalc 2007/09/27 v1.1 Expandable integer calculations (HO)
)
\Hy@SavedSpaceFactor=\count120

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\00miktex\hyperref.cfg"
File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive
)
Package hyperref Info: Option `bookmarks' set `true' on input line 3798.
Package hyperref Info: Option `bookmarksopen' set `true' on input line 3798.
Package hyperref Info: Option `implicit' set `false' on input line 3798.
Package hyperref Info: Hyper figures OFF on input line 3902.
Package hyperref Info: Link nesting OFF on input line 3907.
Package hyperref Info: Hyper index ON on input line 3910.
Package hyperref Info: Plain pages OFF on input line 3917.
Package hyperref Info: Backreferencing OFF on input line 3922.
Package hyperref Info: Implicit mode OFF; no redefinition of LaTeX internals.
Package hyperref Info: Bookmarks ON on input line 4132.
\c@Hy@tempcnt=\count121

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\ltxmisc\url.sty"
\Urlmuskip=\muskip10
Package: url 2006/04/12  ver 3.3  Verb mode for urls, etc.
)
LaTeX Info: Redefining \url on input line 4487.

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\bitset.sty"
Package: bitset 2007/09/28 v1.0 Data type bit set (HO)

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\bigintcalc.sty"
Package: bigintcalc 2007/11/11 v1.1 Expandable big integer calculations (HO)
))
\Fld@menulength=\count122
\Field@Width=\dimen162
\Fld@charsize=\dimen163
Package hyperref Info: Hyper figures OFF on input line 5526.
Package hyperref Info: Link nesting OFF on input line 5531.
Package hyperref Info: Hyper index ON on input line 5534.
Package hyperref Info: backreferencing OFF on input line 5541.
Package hyperref Info: Link coloring OFF on input line 5546.
Package hyperref Info: Link coloring with OCG OFF on input line 5551.
Package hyperref Info: PDF/A mode OFF on input line 5556.
LaTeX Info: Redefining \ref on input line 5596.
LaTeX Info: Redefining \pageref on input line 5600.

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\atbegshi.sty"
Package: atbegshi 2010/03/25 v1.12 At begin shipout hook (HO)
)
\Hy@abspage=\count123


Package hyperref Message: Stopped early.

)

Package hyperref Message: Driver (autodetected): hpdftex.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\hyperref\hpdftex.def"
File: hpdftex.def 2010/09/17 v6.81q Hyperref driver for pdfTeX

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\oberdiek\atveryend.sty"
Package: atveryend 2010/03/24 v1.5 Hooks at very end of document (HO)
Package atveryend Info: \enddocument detected (standard).
)
\Fld@listcount=\count124
\c@bookmark@seq@number=\count125

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\oberdiek\rerunfilecheck.sty"
Package: rerunfilecheck 2010/03/16 v1.6 Rerun checks for auxiliary files (HO)

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\uniquecounter.sty"
Package: uniquecounter 2009/12/18 v1.1 Provides unlimited unique counter (HO)
)
Package uniquecounter Info: New unique counter `rerunfilecheck' on input line 2
71.
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaserequires.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasecompatibility.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasefont.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\amsfonts\amssymb.sty"
Package: amssymb 2009/06/22 v3.00

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\amsfonts\amsfonts.sty"
Package: amsfonts 2009/06/22 v3.00 Basic AMSFonts support
\@emptytoks=\toks23
\symAMSa=\mathgroup4
\symAMSb=\mathgroup5
LaTeX Font Info:    Overwriting math alphabet `\mathfrak' in version `bold'
(Font)                  U/euf/m/n --> U/euf/b/n on input line 96.
)))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasetranslator.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\translator.sty"
Package: translator 2010/06/12 ver 1.10

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\translator-language-mappings.tex")))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasemisc.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasetwoscreens.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.15 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseoverlay.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@argscount=\count126
\beamer@lastskipcover=\skip44
\beamer@trivlistdepth=\count127
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasetitle.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasesection.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\c@lecture=\count128
\c@part=\count129
\c@section=\count130
\c@subsection=\count131
\c@subsubsection=\count132
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseframe.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@framebox=\box40
\beamer@frametitlebox=\box41
\beamer@zoombox=\box42
\beamer@zoomcount=\count133
\beamer@zoomframecount=\count134
\beamer@frametextheight=\dimen164
\c@subsectionslide=\count135
\beamer@frametopskip=\skip45
\beamer@framebottomskip=\skip46
\beamer@frametopskipautobreak=\skip47
\beamer@framebottomskipautobreak=\skip48
\beamer@envbody=\toks24
\c@framenumber=\count136
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseverbatim.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@verbatimfileout=\write4
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseframesize.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@splitbox=\box43
\beamer@autobreakcount=\count137
\beamer@autobreaklastheight=\dimen165
\beamer@frametitletoks=\toks25
\beamer@framesubtitletoks=\toks26
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseframecomponents.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@footins=\box44
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasecolor.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasenotes.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@frameboxcopy=\box45
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasetoc.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasetemplates.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@sbttoks=\toks27

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseauxtemplates.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaseboxes.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\bmb@box=\box46
\bmb@colorbox=\box47
\bmb@boxshadow=\box48
\bmb@boxshadowball=\box49
\bmb@boxshadowballlarge=\box50
\bmb@temp=\dimen166
\bmb@dima=\dimen167
\bmb@dimb=\dimen168
\bmb@prevheight=\dimen169
)
\beamer@blockheadheight=\dimen170
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbaselocalstructure.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\tools\enumerate.sty"
Package: enumerate 1999/03/05 v3.00 enumerate extensions (DPC)
\@enLab=\toks28
)
\c@figure=\count138
\c@table=\count139
\abovecaptionskip=\skip49
\belowcaptionskip=\skip50
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasenavigation.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasetheorems.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\ams\math\amsmath.sty"
Package: amsmath 2000/07/18 v2.13 AMS math features
\@mathmargin=\skip51

For additional information on amsmath, use the `?' option.
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\ams\math\amstext.sty"
Package: amstext 2000/06/29 v2.01

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\ams\math\amsgen.sty"
File: amsgen.sty 1999/11/30 v2.0
\@emptytoks=\toks29
\ex@=\dimen171
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\ams\math\amsbsy.sty"
Package: amsbsy 1999/11/29 v1.2d
\pmbraise@=\dimen172
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\ams\math\amsopn.sty"
Package: amsopn 1999/12/14 v2.01 operator names
)
\inf@bad=\count140
LaTeX Info: Redefining \frac on input line 211.
\uproot@=\count141
\leftroot@=\count142
LaTeX Info: Redefining \overline on input line 307.
\classnum@=\count143
\DOTSCASE@=\count144
LaTeX Info: Redefining \ldots on input line 379.
LaTeX Info: Redefining \dots on input line 382.
LaTeX Info: Redefining \cdots on input line 467.
\Mathstrutbox@=\box51
\strutbox@=\box52
\big@size=\dimen173
LaTeX Font Info:    Redeclaring font encoding OML on input line 567.
LaTeX Font Info:    Redeclaring font encoding OMS on input line 568.
\macc@depth=\count145
\c@MaxMatrixCols=\count146
\dotsspace@=\muskip11
\c@parentequation=\count147
\dspbrk@lvl=\count148
\tag@help=\toks30
\row@=\count149
\column@=\count150
\maxfields@=\count151
\andhelp@=\toks31
\eqnshift@=\dimen174
\alignsep@=\dimen175
\tagshift@=\dimen176
\tagwidth@=\dimen177
\totwidth@=\dimen178
\lineht@=\dimen179
\@envbody=\toks32
\multlinegap=\skip52
\multlinetaggap=\skip53
\mathdisplay@stack=\toks33
LaTeX Info: Redefining \[ on input line 2666.
LaTeX Info: Redefining \] on input line 2667.
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\ams\classes\amsthm.sty"
Package: amsthm 2004/08/06 v2.20
\thm@style=\toks34
\thm@bodyfont=\toks35
\thm@headfont=\toks36
\thm@notefont=\toks37
\thm@headpunct=\toks38
\thm@preskip=\skip54
\thm@postskip=\skip55
\thm@headsep=\skip56
\dth@everypar=\toks39
)
\c@theorem=\count152
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\beamerbasethemes.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.12 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\theme\beamerthemedefault.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\font\beamerfontthemedefault.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\color\beamercolorthemedefault.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\inner\beamerinnerthemedefault.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

\beamer@dima=\dimen180
\beamer@dimb=\dimen181
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\outer\beamerouterthemedefault.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)))
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\bdefs.te
x"
\c@algcounterA=\count153
\c@algcounterB=\count154
\c@algcounterC=\count155
\c@Assumption=\count156
\c@Proposition=\count157
\c@Note=\count158
\c@Setup=\count159
\c@Observation=\count160
\c@Query=\count161
\c@Goal=\count162
\c@Remark=\count163
\c@remark=\count164
\c@Exercise=\count165
\c@Result=\count166
\c@conjecture=\count167
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\fronten
dlayer\tikz.sty"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\basicla
yer\pgf.sty"
Package: pgf 2008/01/15 v2.10 (rcs-revision 1.12)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\modul
es\pgfmoduleshapes.code.tex"
File: pgfmoduleshapes.code.tex 2010/09/09  (rcs-revision 1.13)
\pgfnodeparttextbox=\box53
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\modul
es\pgfmoduleplot.code.tex"
File: pgfmoduleplot.code.tex 2010/10/22  (rcs-revision 1.8)
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\compati
bility\pgfcomp-version-0-65.sty"
Package: pgfcomp-version-0-65 2007/07/03 v2.10 (rcs-revision 1.7)
\pgf@nodesepstart=\dimen182
\pgf@nodesepend=\dimen183
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\compati
bility\pgfcomp-version-1-18.sty"
Package: pgfcomp-version-1-18 2007/07/23 v2.10 (rcs-revision 1.1)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\utiliti
es\pgffor.sty"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\utiliti
es\pgfkeys.sty"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\utili
ties\pgfkeys.code.tex"))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\utili
ties\pgffor.code.tex"
Package: pgffor 2010/03/23 v2.10 (rcs-revision 1.18)
\pgffor@iter=\dimen184
\pgffor@skip=\dimen185
\pgffor@stack=\toks40
\pgffor@toks=\toks41
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\tikz.code.tex"
Package: tikz 2010/10/13 v2.10 (rcs-revision 1.76)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\pgflibraryplothandlers.code.tex"
File: pgflibraryplothandlers.code.tex 2010/05/31 v2.10 (rcs-revision 1.15)
\pgf@plot@mark@count=\count168
\pgfplotmarksize=\dimen186
)
\tikz@lastx=\dimen187
\tikz@lasty=\dimen188
\tikz@lastxsaved=\dimen189
\tikz@lastysaved=\dimen190
\tikzleveldistance=\dimen191
\tikzsiblingdistance=\dimen192
\tikz@figbox=\box54
\tikz@tempbox=\box55
\tikztreelevel=\count169
\tikznumberofchildren=\count170
\tikznumberofcurrentchild=\count171
\tikz@fig@count=\count172

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\modul
es\pgfmodulematrix.code.tex"
File: pgfmodulematrix.code.tex 2010/08/24  (rcs-revision 1.4)
\pgfmatrixcurrentrow=\count173
\pgfmatrixcurrentcolumn=\count174
\pgf@matrix@numberofcolumns=\count175
)
\tikz@expandcount=\count176

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibrarytopaths.code.tex"
File: tikzlibrarytopaths.code.tex 2008/06/17 v2.10 (rcs-revision 1.2)
)))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryarrows.code.tex"
File: tikzlibraryarrows.code.tex 2008/01/09 v2.10 (rcs-revision 1.1)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\pgflibraryarrows.code.tex"
File: pgflibraryarrows.code.tex 2008/10/27 v2.10 (rcs-revision 1.9)
\arrowsize=\dimen193
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryshapes.code.tex"
File: tikzlibraryshapes.code.tex 2008/01/09 v2.10 (rcs-revision 1.1)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryshapes.geometric.code.tex"
File: tikzlibraryshapes.geometric.code.tex 2008/01/09 v2.10 (rcs-revision 1.1)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\shapes\pgflibraryshapes.geometric.code.tex"
File: pgflibraryshapes.geometric.code.tex 2008/06/26 v2.10 (rcs-revision 1.1)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryshapes.misc.code.tex"
File: tikzlibraryshapes.misc.code.tex 2008/01/09 v2.10 (rcs-revision 1.1)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\shapes\pgflibraryshapes.misc.code.tex"
File: pgflibraryshapes.misc.code.tex 2008/10/07 v2.10 (rcs-revision 1.3)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryshapes.symbols.code.tex"
File: tikzlibraryshapes.symbols.code.tex 2008/01/09 v2.10 (rcs-revision 1.1)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\shapes\pgflibraryshapes.symbols.code.tex"
File: pgflibraryshapes.symbols.code.tex 2009/10/27 v2.10 (rcs-revision 1.3)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryshapes.arrows.code.tex"
File: tikzlibraryshapes.arrows.code.tex 2008/01/09 v2.10 (rcs-revision 1.1)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\shapes\pgflibraryshapes.arrows.code.tex"
File: pgflibraryshapes.arrows.code.tex 2008/06/26 v2.10 (rcs-revision 1.1)
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryshapes.callouts.code.tex"
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\shapes\pgflibraryshapes.callouts.code.tex"))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\front
endlayer\tikz\libraries\tikzlibraryshapes.multipart.code.tex"
File: tikzlibraryshapes.multipart.code.tex 2008/01/09 v2.10 (rcs-revision 1.1)

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\generic\pgf\libra
ries\shapes\pgflibraryshapes.multipart.code.tex"
File: pgflibraryshapes.multipart.code.tex 2010/01/07 v2.10 (rcs-revision 1.2)
\pgfnodepartlowerbox=\box56
\pgfnodeparttwobox=\box57
\pgfnodepartthreebox=\box58
\pgfnodepartfourbox=\box59
\pgfnodeparttwentybox=\box60
\pgfnodepartnineteenbox=\box61
\pgfnodeparteighteenbox=\box62
\pgfnodepartseventeenbox=\box63
\pgfnodepartsixteenbox=\box64
\pgfnodepartfifteenbox=\box65
\pgfnodepartfourteenbox=\box66
\pgfnodepartthirteenbox=\box67
\pgfnodeparttwelvebox=\box68
\pgfnodepartelevenbox=\box69
\pgfnodeparttenbox=\box70
\pgfnodepartninebox=\box71
\pgfnodeparteightbox=\box72
\pgfnodepartsevenbox=\box73
\pgfnodepartsixbox=\box74
\pgfnodepartfivebox=\box75
)))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\theme\beamerthemeWarsaw.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\inner\beamerinnerthemerounded.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\outer\beamerouterthemeshadow.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\outer\beamerouterthemesplit.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\color\beamercolorthemeorchid.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\color\beamercolorthemewhale.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\themes\font\beamerfontthemestructurebold.sty"
Runaway argument?
Header$ \pgfrcs@marshal [\pgf@rcsdate \space \pgf@rcsadditional \space \ETC.
! Paragraph ended before \pgf@parseid was complete.
<to be read again> 
                   \par 
l.11 
     
I suspect you've forgotten a `}', causing me to apply this
control sequence to too much text. How can we recover?
My plan is to forget the whole thing and hope for the best.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\compati
bility\pgfarrows.sty"
Package: pgfarrows 2006/10/11 v2.10 (rcs-revision 1.3)


Package pgfarrows Warning: This package is obsolete. pgf.sty will load arrow ma
nagement automatically on input line 17.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\compati
bility\pgfnodes.sty"
Package: pgfnodes 2006/10/11 v2.10 (rcs-revision 1.3)


Package pgfnodes Warning: This package is obsolete. pgf.sty will load node mana
gement automatically on input line 17.

)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\compati
bility\pgfautomata.sty"
Package: pgfautomata 2006/10/11 v2.10 (rcs-revision 1.3)


Package pgfautomata Warning: This package is obsolete. on input line 17.

\pgf@stateradius=\dimen194
\pgf@mooreradius=\dimen195
\pgf@doublethickness=\dimen196
\pgf@statebackoff=\dimen197
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\compati
bility\pgfheaps.sty"
Package: pgfheaps 2006/10/11 v2.10 (rcs-revision 1.3)


Package pgfheaps Warning: This package is obsolete. on input line 16.

\pgf@heapx=\dimen198
\pgf@heapy=\dimen199
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\pgf\compati
bility\pgfshade.sty"
Package: pgfshade 2006/10/11 v2.10 (rcs-revision 1.3)


Package pgfshade Warning: This package is obsolete. pgf.sty will load shade man
agement automatically on input line 17.

) ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\inputenc.sty"
Package: inputenc 2008/03/30 v1.1d Input encoding file
\inpenc@prehook=\toks42
\inpenc@posthook=\toks43

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\base\latin1.def"
File: latin1.def 2008/03/30 v1.1d Input encoding file
))
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\colortbl\co
lortbl.sty"
Package: colortbl 2001/02/13 v0.1j Color table columns (DPC)
 ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\tools\array.sty"
Package: array 2008/09/09 v2.4c Tabular extension package (FMi)
\col@sep=\dimen200
\extrarowheight=\dimen201
\NC@list=\toks44
\extratabsurround=\skip57
\backup@length=\skip58
)
\everycr=\toks45
\minrowclearance=\skip59
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\babel\babel.sty"
Package: babel 2008/07/06 v3.8l The Babel package

*************************************
* Local config file bblopts.cfg used
*
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\00miktex\bblopts.cfg"
File: bblopts.cfg 2006/07/31 v1.0 MiKTeX 'babel' configuration
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\babel\english.ldf"
Language: english 2005/03/30 v3.3o English support from the babel system

("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\babel\babel.def"
File: babel.def 2008/07/06 v3.8l Babel common definitions
LaTeX Info: Redefining \textlatin on input line 82.
\babel@savecnt=\count177
\U@D=\dimen202
)
\l@canadian = a dialect from \language\l@american 
\l@australian = a dialect from \language\l@british 
\l@newzealand = a dialect from \language\l@british 
))
("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\psnfss\times.sty"
Package: times 2005/04/12 PSNFSS-v9.2a (SPQR) 
)
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.a
ux")
LaTeX Font Info:    Checking defaults for OML/cmm/m/it on input line 73.
LaTeX Font Info:    ... okay on input line 73.
LaTeX Font Info:    Checking defaults for T1/cmr/m/n on input line 73.
LaTeX Font Info:    ... okay on input line 73.
LaTeX Font Info:    Checking defaults for OT1/cmr/m/n on input line 73.
LaTeX Font Info:    ... okay on input line 73.
LaTeX Font Info:    Checking defaults for OMS/cmsy/m/n on input line 73.
LaTeX Font Info:    ... okay on input line 73.
LaTeX Font Info:    Checking defaults for OMX/cmex/m/n on input line 73.
LaTeX Font Info:    ... okay on input line 73.
LaTeX Font Info:    Checking defaults for U/cmr/m/n on input line 73.
LaTeX Font Info:    ... okay on input line 73.
LaTeX Font Info:    Checking defaults for PD1/pdf/m/n on input line 73.
LaTeX Font Info:    ... okay on input line 73.
LaTeX Font Info:    Try loading font information for OT1+phv on input line 73.
 ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\psnfss\ot1phv.fd"
File: ot1phv.fd 2001/06/04 scalable font definitions for OT1/phv.
)
*geometry* driver: auto-detecting
*geometry* detected driver: pdftex
*geometry* verbose mode - [ preamble ] result:
* driver: pdftex
* paper: custom
* layout: <same size as paper>
* layoutoffset:(h,v)=(0.0pt,0.0pt)
* modes: includehead includefoot 
* h-part:(L,W,R)=(28.45274pt, 307.28987pt, 28.45274pt)
* v-part:(T,H,B)=(0.0pt, 273.14662pt, 0.0pt)
* \paperwidth=364.19536pt
* \paperheight=273.14662pt
* \textwidth=307.28987pt
* \textheight=244.6939pt
* \oddsidemargin=-43.81725pt
* \evensidemargin=-43.81725pt
* \topmargin=-72.26999pt
* \headheight=14.22636pt
* \headsep=0.0pt
* \topskip=9.0pt
* \footskip=14.22636pt
* \marginparwidth=4.0pt
* \marginparsep=10.0pt
* \columnsep=10.0pt
* \skip\footins=7.0pt plus 4.0pt minus 2.0pt
* \hoffset=0.0pt
* \voffset=0.0pt
* \mag=1000
* \@twocolumnfalse
* \@twosidefalse
* \@mparswitchfalse
* \@reversemarginfalse
* (1in=72.27pt=25.4mm, 1cm=28.453pt)


("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\context\base\supp
-pdf.mkii"
[Loading MPS to PDF converter (version 2006.09.02).]
\scratchcounter=\count178
\scratchdimen=\dimen203
\scratchbox=\box76
\nofMPsegments=\count179
\nofMParguments=\count180
\everyMPshowfont=\toks46
\MPscratchCnt=\count181
\MPscratchDim=\dimen204
\MPnumerator=\count182
\everyMPtoPDFconversion=\toks47
) ABD: EveryShipout initializing macros
\AtBeginShipoutBox=\box77
Package hyperref Info: Link coloring OFF on input line 73.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\hyperref\nameref.sty"
Package: nameref 2010/04/30 v2.40 Cross-referencing by name of section

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\oberdiek\refcount.sty"
Package: refcount 2008/08/11 v3.1 Data extraction from references (HO)
)
("C:\Program Files (x86)\MiKTeX 2.9\tex\generic\oberdiek\gettitlestring.sty"
Package: gettitlestring 2009/12/18 v1.3 Cleanup title references (HO)
)
\c@section@level=\count183
)
LaTeX Info: Redefining \ref on input line 73.
LaTeX Info: Redefining \pageref on input line 73.
LaTeX Info: Redefining \nameref on input line 73.

("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.o
ut")
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.o
ut")
\@outlinefile=\write5
LaTeX Font Info:    Overwriting symbol font `operators' in version `normal'
(Font)                  OT1/cmr/m/n --> OT1/cmss/m/n on input line 73.
LaTeX Font Info:    Overwriting symbol font `operators' in version `bold'
(Font)                  OT1/cmr/bx/n --> OT1/cmss/bx/n on input line 73.
\symnumbers=\mathgroup6
\sympureletters=\mathgroup7
LaTeX Font Info:    Overwriting math alphabet `\mathrm' in version `normal'
(Font)                  OT1/cmss/m/n --> OT1/ptm/m/n on input line 73.
LaTeX Font Info:    Redeclaring math alphabet \mathbf on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathbf' in version `normal'
(Font)                  OT1/cmr/bx/n --> OT1/phv/bx/n on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathbf' in version `bold'
(Font)                  OT1/cmr/bx/n --> OT1/phv/bx/n on input line 73.
LaTeX Font Info:    Redeclaring math alphabet \mathsf on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathsf' in version `normal'
(Font)                  OT1/cmss/m/n --> OT1/phv/m/n on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathsf' in version `bold'
(Font)                  OT1/cmss/bx/n --> OT1/phv/m/n on input line 73.
LaTeX Font Info:    Redeclaring math alphabet \mathit on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathit' in version `normal'
(Font)                  OT1/cmr/m/it --> OT1/phv/m/it on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathit' in version `bold'
(Font)                  OT1/cmr/bx/it --> OT1/phv/m/it on input line 73.
LaTeX Font Info:    Redeclaring math alphabet \mathtt on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathtt' in version `normal'
(Font)                  OT1/cmtt/m/n --> OT1/pcr/m/n on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathtt' in version `bold'
(Font)                  OT1/cmtt/m/n --> OT1/pcr/m/n on input line 73.
LaTeX Font Info:    Overwriting symbol font `numbers' in version `bold'
(Font)                  OT1/phv/m/n --> OT1/phv/bx/n on input line 73.
LaTeX Font Info:    Overwriting symbol font `pureletters' in version `bold'
(Font)                  OT1/phv/m/it --> OT1/phv/bx/it on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathrm' in version `bold'
(Font)                  OT1/cmss/bx/n --> OT1/ptm/bx/n on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathbf' in version `bold'
(Font)                  OT1/phv/bx/n --> OT1/phv/bx/n on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathsf' in version `bold'
(Font)                  OT1/phv/m/n --> OT1/phv/bx/n on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathit' in version `bold'
(Font)                  OT1/phv/m/it --> OT1/phv/bx/it on input line 73.
LaTeX Font Info:    Overwriting math alphabet `\mathtt' in version `bold'
(Font)                  OT1/pcr/m/n --> OT1/pcr/bx/n on input line 73.

("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\dicts\translator-basic-dictionary\translator-basic-dictionary-Engli
sh.dict"
Dictionary: translator-basic-dictionary, Language: English 
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\dicts\translator-bibliography-dictionary\translator-bibliography-di
ctionary-English.dict"
Dictionary: translator-bibliography-dictionary, Language: English 
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\dicts\translator-environment-dictionary\translator-environment-dict
ionary-English.dict"
Dictionary: translator-environment-dictionary, Language: English 
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\dicts\translator-months-dictionary\translator-months-dictionary-Eng
lish.dict"
Dictionary: translator-months-dictionary, Language: English 
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\dicts\translator-numbers-dictionary\translator-numbers-dictionary-E
nglish.dict"
Dictionary: translator-numbers-dictionary, Language: English 
)
("C:\Users\Piotr Wojciechowski\AppData\Roaming\MiKTeX\2.9\tex\latex\beamer\base
\translator\dicts\translator-theorem-dictionary\translator-theorem-dictionary-E
nglish.dict"
Dictionary: translator-theorem-dictionary, Language: English 
)
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.n
av")
LaTeX Font Info:    Font shape `OT1/phv/bx/n' in size <5> not available
(Font)              Font shape `OT1/phv/b/n' tried instead on input line 73.
LaTeX Font Info:    Try loading font information for U+msa on input line 75.
 ("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\amsfonts\umsa.fd"
File: umsa.fd 2009/06/22 v3.00 AMS symbols A
)
LaTeX Font Info:    Try loading font information for U+msb on input line 75.

("C:\Program Files (x86)\MiKTeX 2.9\tex\latex\amsfonts\umsb.fd"
File: umsb.fd 2009/06/22 v3.00 AMS symbols B
)
LaTeX Font Info:    Font shape `OT1/phv/m/it' in size <8> not available
(Font)              Font shape `OT1/phv/m/sl' tried instead on input line 75.
LaTeX Font Info:    Font shape `OT1/phv/m/it' in size <6> not available
(Font)              Font shape `OT1/phv/m/sl' tried instead on input line 75.
LaTeX Font Info:    Font shape `OT1/phv/m/it' in size <5> not available
(Font)              Font shape `OT1/phv/m/sl' tried instead on input line 75.
LaTeX Font Info:    Font shape `OT1/phv/bx/n' in size <4> not available
(Font)              Font shape `OT1/phv/b/n' tried instead on input line 75.
 [1{C:/Users/Piotr Wojciechowski/AppData/Local/MiKTeX/2.9/pdftex/config/pdftex.
map}

]
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.t
oc") [2

]
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.t
oc") [3

]
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.t
oc") [4

]
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.t
oc") [5

] [6

] [7

] [8

] [9

] [10

]
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.t
oc") [11

]
LaTeX Font Info:    Font shape `OT1/phv/bx/n' in size <8> not available
(Font)              Font shape `OT1/phv/b/n' tried instead on input line 120.
LaTeX Font Info:    Font shape `OT1/phv/bx/n' in size <6> not available
(Font)              Font shape `OT1/phv/b/n' tried instead on input line 120.
 [12

] [13

] [14

] [15

] [16

] [17

] [18

] [19

] [20

] [21

] [22

] [23

] [24

]
[25

] [26

] [27

]
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.t
oc") [28

] [29

] [30

] [31

] [32

] [33

] [34

] [35

] [36

] [37

] [38

] [39

]
("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.t
oc") [40

] [41

] [42

] [43

] [44

]
\tf@nav=\write6
\tf@toc=\write7
\tf@snm=\write8
Package atveryend Info: Empty hook `BeforeClearDocument' on input line 241.
Package atveryend Info: Empty hook `AfterLastShipout' on input line 241.

("C:\Users\Piotr Wojciechowski\Documents\My Dropbox\piotr\Presentation\invopt.a
ux")
Package atveryend Info: Executing hook `AtVeryEndDocument' on input line 241.
Package rerunfilecheck Info: File `invopt.out' has not changed.
(rerunfilecheck)             Checksum: 86B0F5077CA679550ED9BFF1CC595056;615.
 ) 
Here is how much of TeX's memory you used:
 20358 strings out of 494019
 419673 string characters out of 3143840
 524384 words of memory out of 3000000
 22976 multiletter control sequences out of 15000+200000
 26723 words of font info for 53 fonts, out of 3000000 for 9000
 714 hyphenation exceptions out of 8191
 49i,19n,67p,465b,897s stack positions out of 5000i,500n,10000p,200000b,50000s
{C:/Program Files (x86)/MiKTeX 2.9/fonts/enc/dvips/fontname/8r.enc}<C:/Progra
m Files (x86)/MiKTeX 2.9/fonts/type1/public/amsfonts/cmextra/cmex8.pfb><C:/Prog
ram Files (x86)/MiKTeX 2.9/fonts/type1/public/amsfonts/cm/cmmi6.pfb><C:/Program
 Files (x86)/MiKTeX 2.9/fonts/type1/public/amsfonts/cm/cmmi8.pfb><C:/Program Fi
les (x86)/MiKTeX 2.9/fonts/type1/public/amsfonts/cm/cmss8.pfb><C:/Program Files
 (x86)/MiKTeX 2.9/fonts/type1/public/amsfonts/cm/cmsy6.pfb><C:/Program Files (x
86)/MiKTeX 2.9/fonts/type1/public/amsfonts/cm/cmsy8.pfb><C:/Program Files (x86)
/MiKTeX 2.9/fonts/type1/public/amsfonts/symbols/msbm10.pfb><C:/Program Files (x
86)/MiKTeX 2.9/fonts/type1/urw/helvetic/uhvb8a.pfb><C:/Program Files (x86)/MiKT
eX 2.9/fonts/type1/urw/helvetic/uhvr8a.pfb><C:/Program Files (x86)/MiKTeX 2.9/f
onts/type1/urw/helvetic/uhvro8a.pfb>
Output written on invopt.pdf (44 pages, 459821 bytes).
PDF statistics:
 1558 PDF objects out of 1728 (max. 8388607)
 98 named destinations out of 1000 (max. 500000)
 241 words of extra memory for PDF output out of 10000 (max. 10000000)